HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.     

Effects on winter circulation of short and long term solar wind changes

Indices of the North Atlantic Oscillation and the Arctic Oscillation show correlations on the day-to-day timescale with the solar wind speed (SWS). Minima in the indices were found on days of SWS minima during years of high stratospheric aerosol loading. The spatial distribution of surface pressure changes during 1963–2011 with day-to-day changes in SWS shows a pattern resembling the NAO. Such a pattern was noted for year-to-year variations by Boberg and Lundstedt (2002), who compared NAO variations with the geo-effective solar wind electric field (the monthly average SWS multiplied by the average southward component, i.e., negative Bz component, of the interplanetary magnetic field). The spatial distribution of the correlations of geopotential height changes in the troposphere and stratosphere with the SWS; the geo-effective electric field (SWS∗Bz); and the solar 10.7 cm flux suggests that solar wind inputs connected to the troposphere via the global electric circuit, together with solar ultraviolet irradiance acting on the stratosphere, affect regional atmospheric dynamics.     

高能电子辐照下介质-导体相间结构深层充电特性研究

为研究影响介质-导体相间结构深层充电特性的内在因素,设计了不同构型的试验样品,利用90Sr放射源模拟空间高能电子环境对样品进行深层充电辐照试验,测量了充电电位的差异。并借助深层充电三维仿真软件计算介质-导体相间结构在不同几何构型情况下的深层充电电位、电场分布。试验和仿真结果表明,介质最高表面电位以及介质内部最大电场均与介质宽度和高度呈正相关。其他条件不变时,介质越宽,或越高于导体表面,发生放电的风险就越高。在介质与导体侧面存在微小缝隙情况下,介质内最大电场显著增强,易发生内部击穿。而在介质与导体之间的真空间隙内,电场很容易超过击穿阈值,放电风险很大。航天工程应用中为降低此种结构深层充放电的风险,在满足绝缘性能及其他要求的前提下应尽量减小介质的宽度,降低介质与导体间的高度差,并确保介质与导体侧面接触良好。     

Ф3．2m风洞活动地板系统研制

目前在风洞中通常采用固定地板和活动地板两种模拟方法开展飞行器地面效应研究，确定地面效应影响量大小。采用固定地板模拟地面时，由于存在地板边界层，不能真实模拟飞机近地飞行状况。采用活动地板模拟地面时，由于活动带运行速度和方向与来流一致，在活动地板表面不存在边界层，可以真实模拟飞机近地飞行状况，提高地面效应试验数据的精准度。介绍了Ф3．2m风洞活动地板系统的研制情况，对活动地板系统的组成、结构形式、主要技术指标等作了简要介绍。YF-16模型试验结果表明：Ф3．2m风洞活动地板试验系统的性能指标达到了设计要求，活动带最大运行速度为60m／s；活动地板和固定地板两种模拟方法获得的地面效应试验结果存在较大差别，差别大小随地板高度和飞机姿态角变化而变化。     

扩压叶栅剪敏液晶试验与图像处理

基于剪敏液晶涂层(SSLCC)材料的光学特性,发展了适合于内流场狭小空间环境下的SSLCC边界层流动显示技术:设计并加工了微型摄像头-发光二极管(LED)组合式图像采集设备解决拍摄光路问题;基于二维SSLCC图像与三维模型的空间映射关系,建立了真实模型的三维重构方法;通过SSLCC图像光谱Hue色相值转化,实现了液晶图像信息的定量分析。以西北工业大学高亚声速平面叶栅风洞为平台,开展了某扩压叶栅吸力面边界层流态的剪敏液晶流动显示试验。结果表明:所发展的剪敏液晶显示技术可进行叶栅内流场边界层的流态测量;所建立的图像处理方法可为边界层流动特征的辨识及其特征位置确定提供技术支撑;在来流马赫数为0.12、攻角为0°的条件下,叶片吸力面边界层沿流向依次经历了层流边界层分离、再附着及转捩为湍流状态的过程,且边界层的发展受叶栅角区分离流动影响,造成其前缘分离区减小,再附着点和边界层转捩位置向前缘移动。     

An experimental system for release simulation of internal stores in a supersonic wind tunnel

Aerodynamic parameters obtained from separation experiments of internal stores in a wind tunnel are significant in aircraft designs. Accurate wind tunnel tests can help to improve the release stability of the stores and in-flight safety of the aircrafts in supersonic environments.A simulative system for free drop experiments of internal stores based on a practical project is provided in this paper. The system contains a store release mechanism, a control system and an attitude measurement system. The release mechanism adopts a six-bar linkage driven by a cylinder, which ensures the release stability. The structure and initial aerodynamic parameters of the stores are also designed and adjusted. A high speed vision measurement system for high speed rolling targets is utilized to measure the pose parameters of the internal store models and an optimizing method for the coordinates of markers is presented based on a priori model. The experimental results show excellent repeatability of the system, and indicate that the position measurement precision is less than0.13 mm, and the attitude measurement precision for pitch and yaw angles is less than 0.126°, satisfying the requirements of practical wind tunnel tests. A separation experiment for the internal stores is also conducted in the FL-3 wind tunnel of China Aerodynamics Research Institute.     

宽马赫数路德维希管风洞及其关键技术

随着高马赫数飞行器研制需求的增加，急需脉冲型风洞运行范围向中低马赫数段扩展，特别是需要具有跨马赫数运行能力。以路德维希管原理运行的管风洞试验设备，由于建设及使用成本较低、参数调节方便、流场品质高等优点，已在亚/跨/超声速及高超声速领域得到了发展和应用，体现出了宽马赫数的应用潜力。本文分析了宽马赫数脉冲型风洞发展现状，重点介绍了路德维希管风洞及其在宽马赫数应用中急需解决的关键技术，包括宽马赫数喷管设计技术、高温管外加热技术以及高温高压隔离技术。     

卷簧式浅层月壤取样器设计及动力学分析

面向浅层月壤取样,文章设计了新颖的卷簧式可伸缩小型月壤取样器,它包括柔性取样臂和振动式取样头。对取样器进行了动力学有限元分析,研究了取样臂为不同长度时取样头的振动模态及频率响应,得出取样臂一阶横振频率与取样臂长度呈负幂函数关系;对取样器测控系统进行了振动试验,通过扫频方式测量取样臂为不同长度时的自振频率,给出了取样臂长...     

薄壁件多点柔性加工变形的分析和控制研究

针对开发薄壁件多点柔性工装系统的需求,研究薄壁件多点柔性铣削加工中的变形问题,运用有限元软件ABAQUS对零件的实际加工过程进行模拟仿真.多点柔性工装系统采用布局,分析吸盘边距和吸盘真空度对薄壁件加工变形的影响.通过改变A、B、C三组吸盘的真空度建立三因素四水平正交试验,总结出A、B、C三组吸盘分别调整真空度至-0.5bar、-0.8bar、-0.5bar能够获得更小的平均变形量,对多点柔性工装系统控制薄壁件的加工变形方面给出了建议.     

基于虚拟正交试验的压气机叶轮轴-毂径向微动特性研究

用Pro/E建立压气机叶轮轴-毂三维模型,利用ANSYS软件采用子结构结合网格随移技术的分析方法,建立其有限元模型。采用虚拟正交试验方法对压气机叶轮轴-毂进行仿真,得出过盈量、摩擦系数、转速对最大单位摩擦功和平均摩擦功影响显著性次序及影响规律,得到最优组合。结果表明,模拟及正交试验优化结果准确、可靠,有效地降低了摩擦磨损程度,对实际装配过程具有一定的指导作用。